1st International Conference on Progress in Additive Manufacturing
 

Click Here to download Programme.

Time Programme
1700-1900
(120 mins)
Registration
Welcome reception
Venue: Nanyang Executive Centre, NTU Singapore
Time Programme Speaker
0800-0900
(60 mins)
Arrival and Registration
0900-0920
(20 mins)
Arrival of Guest-of-Honour (GOH), Minister – Mr S Iswaran
0920-0930
(10 mins)
Welcome Address by Prof. Bertil Andersson
President, Nanyang Technological University, Singapore
0930-0940
(10 mins)
Speech by Mr S Iswaran,
Ministry of Trade and Industry (Industry)
0940-0955
(15 mins)
Official Launch of Singapore Centre for 3D Printing
0955-1015
(20 mins)
Prize Award Ceremony for Singapore International 3D Printing Competitions 2016
Concurrent Sessions – Start of conference
1015-1055
(40 mins)
Keynote Lecture 1:
Perspectives and Trends in Additive Manufacturing
Prof. David Lee Bourell
Professor, The University of Texas at Austin, USA
1055-1110
(15 mins)
TEA BREAK & NETWORKING SESSION  
  Concurrent Sessions and Exhibition
Session Chair:
Dr Chen Songlin
Venue1 (Auditorium)
Session Chair:
Assistant Professor
Moon Seung-Ki
Venue 2 (LT1)
Session Chair:
Assistant Professor Zhou Kun
Venue 3 (LT2)
1110-1130
(20 mins)  
Applications and Industry
Rapid Tooling for Metal Injection Moulding Process
Invited Speaker:
Altaf Khurram
Mechanical Engineering Department, Universiti Teknologi Petronas, Malaysia
Equipment and New Techniques
Electron Beam Melting of Gamma-Titanium Aluminide for Next Generation Aero-Engine Components
Invited Speaker:
Mohammad Ashfaq
King Saud University, Saudi Arabia
Measurement Science and Methods
New Network based Finite Element Method for Stereolithography Process Analysis
Invited Speaker:
Cunico Marlon Wesley Machado
University of São Paulo, Brazil
1130-1150
(20 mins)
Measurement Science and Methods
Water Absorption and Mechanical Properties Evaluation of Surface Modified ABS Printing Parts
Invited Speaker:
Leite Marco
IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal
Materials
Recent Researches on High-Performance Ceramics Fabricated by Selective Laser Sintering (SLS)
Invited Speaker:
Wu Jia-Min
School of Materials Science and Engineering, Huazhong University of Science and Technology, China
Equipment and New Techniques
New Additive Manufacturing Technology Based on Selective Metal-Polymer Composite Formation
Invited Speaker:
Cunico Marlon Wesley Machado
University of São Paulo, Brazil
1150-1205
(15 mins)
Applications and Industry
Application of Polyjet Technology in Additive Manufacturing of Personalised Nail Art
Lu Zhen
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Rheology and Printability of Engineered Cementitious Composites-A Literature Review
Weng Yiwei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Design
Characterisation of Micro-Lattices Fabricated by Selective Laser Melting
Sing Swee Leong
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1205-1220
(15 mins)
Applications and Industry
The Preparation of Calcia-Based Ceramic Slurry for Rapid Manufacturing Hollow Turbine Blade Based on Stereolithography
Lu Zhongliang
Xi'an Jiaotong University, China
Materials
Selective Laser Sintering of Polypropylene Feed Spacers for Spiral Wound Membrane Modules
Tan Wen See
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
       
Design
Transient Electrowetting on Dielectric for Activating Droplet in Bioprinting Applications
Vo Quoc
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
  Concurrent Sessions and Exhibition
Session Chair:
Dr Chen Songlin
Venue1 (Auditorium)
Session Chair:
Assistant Professor
Moon Seung-Ki
Venue 2 (LT1)
Session Chair:
Assistant Professor Zhou Kun
Venue 3 (LT2)
1220-1235
(15 mins)
Equipment and New Techniques
Adaptive Layer Height during DLP Materials Processing
Pedersen David Bue
Department of Mechanical Engineering, Technical University of Denmark, Denmark
Measurement Science and Methods
Controlling Polymer Digital Material Composition with Layering
Shukri Bin Abdul Jalil
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
A Preliminary Study of 3D Printability of Alginate Hydrogel and Effect of Graphene Oxide for 3D Biofabrication
Li Huijun
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1235-1250
(15 mins)
Equipment and New Techniques
A Self-Peeling Vat for Improved Release Capabilities during DLP Materials Processing
Pedersen David Bue
Department of Mechanical Engineering, Technical University of Denmark, Denmark
Software and Data Processing Unified Storage File Format for Additive Manufacturing
Felix Baumann
University of Stuttgart, Germany
Materials
Comparative Study on Tribological Behaviour of TI-6AL-4V and CoCr Samples Additively Manufactured with Electron Beam Melting
Toh Wei Quan
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1250-1305
(15 mins)
Materials
Properties of 3D Printable Concrete
Paul Suvash Chandra
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
Applications and Industry
Additive Manufacturing for Active Electronic Components : A Review
N Saengchairat
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Measurement Science and Methods
Effects of Speed Function and Focus Offset on Selective Electron Beam Melting of Stainless Steel 316L
Jing Wei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1305-1400
(55 mins)
LUNCH & NETWORKING SESSION
1400-1440
(40 mins)
Keynote Lecture 2:
AM Format
Prof. Alain Bernard
Professor, Ecole Centrale de Nantes, France
1440-1500
(20 mins)
Lecture 1:
Metal Additive Manufacturing with
SLM Solutions’ multi-lasers technology.          
Mr Jeffrey Chew
SLM Solutions
  Concurrent Sessions and Exhibition
Session Chair:
Associate Professor Li Hua
Venue1 (Auditorium)
Session Chair:
Assistant Professor David Fan
Venue 2 (LT1)
Session Chair:
Assistant Professor Lau Gih Keong
Venue 3 (LT2)
1500-1515
(15 mins)
Applications and Industry
Effect of Alumina-Based Fiber on The Mid-Temperature Strength of Integral Ceramic Mold for Casting Hollow Turbine Blade
Tian Guoqiang
Xi'an Jiaotong University, China
Materials
Preliminary Investigation on Selective Laser Melting of Pure Tin
Yap Chor Yen
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Applications and Industry
The Disruptive Evolution of 3D Printing
Panda Biranchi Narayan
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1515-1530
(15 mins)
Applications and Industry
Convective Heat Transfer Performance of Staggered Heat Sink Arrays Fabricated by Selective Laser Melting
Wong Kin Keong
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Synthesis of A Conductive Polymer for Potential Use in Printing Prosthetic Hands Using FDM Technique
Zhong Shaohong
Raffles Science Institute, Raffles Institution, Singapore
Materials
Effect of Energy Density on Density and Microstructure for Selective Laser Melted Stainless Steel 316L
Sun Zhongji
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1530-1550
(20 mins)
TEA BREAK & NETWORKING SESSION
  Concurrent Sessions and Exhibition
Session Chair:
Associate Professor Li Hua
Venue1 (Auditorium)
Session Chair:
Assistant Professor David Fan
Venue 2 (LT1)
Session Chair:
Assistant Professor
Lau Gih Keong
Venue 3 (LT2)
1550-1605
(15 mins)
Applications and Industry
Structural, Mechanical and Invitro Study on Pulsed Laser Deposition of Hydroxyapatite on Additive Manufactured Substrate
Kuppuswamy Hariharan
CEG Campus, Anna University, Chennai, India
Materials
Potential of Cold Spray as Additive Manufacturing for TI-6AL-4V
Tan Adrian Wei-Yee
Rolls-Royce@ NTU Corporate Lab, Nanyang Technological University, Singapore
Design
Quantifying Mechanical Properties of Material Extrusion Fabricated Lattice Structures based on Semi-Rigid Joint Frame Formulation
Park Sang-in
The Woodruff School of Mechanical Engineering, Georgia institute of Technology, Atlanta Georgia, USA            
  Concurrent Sessions and Exhibition
Session Chair:
Associate Professor Li Hua
Venue1 (Auditorium)
Session Chair:
Assistant Professor David Fan
Venue 2 (LT1)
Session Chair:
Assistant Professor
Lau Gih Keong
Venue 3 (LT2)
1605-1620
(15 mins)
Applications and Industry
Haptic - 3D Additive Manufacturing in the Sports Industry
Schmidt Thomas
Huafeng Textile Group, China
Materials
Laser Melting Of Cu Based Powder Shape Memory Alloys: Inert Gas Pressure And Scanning Pattern Effect On Transformation Temperature And Ultimate Strength
Jorge Ramos-Grez
Mechanical and Metallurgical Engineering Department, Pontificia Universidad Catolica de Chile, Chile
Design
Study on Curling Due to Part Distortion in Additive Manufactured Thin Feature
Manivannan Sugavaneswaran
CEG Campus, Anna University, Chennai, India
1620-1635
(15 mins)
Applications and Industry
Investigation of the Mechanical Properties of 3D Printed Compliant Mechanisms
Pham Minh Tuan
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Additive Manufacturing of ZnO Thin Film for Micro Size UV Photodetector
Du Hejun
Singapore Institute of Manufacturing Technology, Singapore
Design
A Strategy to Locally Optimise the Material Composition of AM Construction Elements
Craveiro Flavio
CIAUD, Faculty of Architecture, University of Lisbon, Portugal
1635–1650
(15mins)
Applications and Industry
Wind Tunnel Testing of a Joined-Wing Aircraft Model with Additive Manufactured Components
Teo Zhen Wei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Measurement Science and Methods
Finite Element Analysis of Temperature Field in Selective Laser Melting Process
Tan Peng Fei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Design, Fabrication and Evaluation of PCL/Graphene Scaffolds for Bone Regeneration
Wang Weiguang
University of Manchester, UK
1650-1705
(15 mins)
Applications and Industry
Embedding Electronics in Printing Ultem 9085 Quadcopter
Keane Phillip
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Fabrication of Samaria Doped Ceria Thin Film on Porous Substrate by Slurry Spin Coating
Lee Tsung-Han
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore        
Design
Kinematic Pair Design for 3D Printing of Micro Mettalic Robotic Mechanisms
Chen Yonghua
The University of Hong Kong, Hong Kong
  Concurrent Sessions and Exhibition
Session Chair:
Associate Professor Li Hua
Venue1 (Auditorium)
Session Chair:
Assistant Professor David Fan
Venue 2 (LT1)
Session Chair:
Assistant Professor
Lau Gih Keong
Venue 3 (LT2)
1705-1720
(15 mins)
Applications and Industry
Application of 3D Printed Medical Aid for Paediatric Cancer Patients
Peh Zhen Kai
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
A Review of 3D Printable Construction Materials and Applications
Lu Bing
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Design
Cross Entropy for Weight Minimization of a Compressive Strut
Malekjafarian Abdollah
University College Dublin, Ireland
1720-1735
(15 mins)
Applications and Industry
Failure Mode Analysis of Kagome Lattice Structures
Gautam Rinoj
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Measurement Science and Methods
Multi-Scale Modeling of Additive Manufacturing Process
Chandra Shubham
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Applications and Industry
Fabricating Patient-Customizable Tubular Scaffolds from Biodegradable Polymer
Tan Yu Jun
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1735 CLOSING
 
Time Programme Speaker
0900-0940
(40 mins)
Keynote Lecture 3: 
Functional and Responsive Materials in 3D Printing
Prof. Shlomo Magdassi
Professor, The Hebrew University of Jerusalem, State of Israel 
0940-1020
(40 mins)
Keynote Lecture 4: 
Design for Additive Manufacturing
Prof. David Rosen
Professor, Georgia Institute of Technology, USA
1020-1040
(20 mins)
TEA BREAK & NETWORKING SESSION
  Concurrent Session and Exhibition
Session Chair:
 Nanyang Assistant Professor
Kim Young-Jin
Venue1 (Auditorium)
Session Chair:
Assistant Professor Li Peifeng
Venue 2 (LT1)
Session Chair:
Assistant Professor
Zhou Yufeng
Venue 3 (LT2)
1040-1100
(20 mins)
Applications and Industry
Status of Standardization for Additive Manufacturing
Invited Speaker:
Zhou Wei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
Materials
Simulating the Dynamic Deformation Behaviour of Selective Laser Melted Stainless Steel Microlattice Structures
Invited Speaker:
Li Peifeng
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Near-Surface Properties of Stainless Steels Repaired by Alloy 625 Using Laser Direct Energy Deposition
Invited Speaker:
J.Y. Hascoet/ Surendar Marya
Ecole Centrale Nantes
1100-1120
(20 mins)
Applications and Industry
Challenges and Opportunities in Overcoming Barriers to Sustainable Additive Manufacturing Adoption by Industry
Invited Speaker:
Wong David
Nanyang Polytechnic, Singapore  
Materials
Preliminary Study on Solvent Effect in Fiber Fabrication in Near-Field Electrospinning
Invited Speaker:
Koomsap Pisut
Industrial & Manufacturing Engineering, Asian Institute of Technology, Thailand
Equipment and New Techniques
The Influence of Preheating on Laser Beam Melting
Invited Speaker:
Merkel Markus
Aalen University of Applied Sciences, Germany
1120-1135
(15 mins)
Materials
Selective Laser Melting of Aluminium Metal Matrix Composites
Sercombe Tim
The University of Western Australia, Australia 
Measurement Science and Methods
Real Time Monitoring of Exposure Controlled Projection Lithography
Jariwala Amit
Georgia Institute of Technology, Georgia, USA      
Materials
Bioceramic Composite Scaffolds for Tissue Engineering
Blaker Jonny
University of Manchester, UK
  Concurrent Session and Exhibition
Session Chair:
Nanyang Assistant Professor
Kim Young-Jin
Venue1 (Auditorium)
Session Chair:
Assistant Professor Li Peifeng
Venue 2 (LT1)
Session Chair:
Assistant Professor
Zhou Yufeng
Venue 3 (LT2)
1135-1150
(15 mins)
Measurement Science and Methods
A Model of Parallel Kinematics for Machine Calibration
Pedersen David Bue
Department of Mechanical University, Technical University of Denmark, Denmark
Applications and Industry
A Study of the State-Of-The-Art Printed Passive Electronic Components Through Fully Additive Manufacturing Methods
Tan Hong Wei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
A Preliminary Study on The Extrusion Resolution of Pluronic F127 for Bioprinting 260 Thermo-Responsive Hydrogel Constructs
Ratima Suntornnond
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1150-1205
(15 mins)
Materials
State of the Art Review on Selective Laser Melting of Stainless Steel for Future Applications in the Marine Industry
Wu Wenjin
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Measurement Science and Methods
Understanding the Link Between Process Parameters, Microstructure and Mechanical Properties of Laser Sintered PA12 Parts through X-Ray Computed Tomography
Pavan Michele
Materialise NV, Leuven, Belgium  
Applications and Industry
Topology Optimization and Structure Partition for Additive Manufacturing: A Literature Review
Xu Feifei
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore   
1205-1220
(15 mins)
Equipment and New Techniques
Review of Multi-Material in Additive Manufacturing
Tan Jie Lun
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Measurement Science and Methods
3D Printing Structures that Exhibit Torsions
Noh Kyoung-Seok
Gwangju Institute of Science and Technology, Gwangju, South Korea
Applications and Industry
3D Printing of Anatomy Bio-Models for Medical Education
Tan Heang Kuan Joel
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1220-1235
(15 mins)
Applications and Industry
Investigation of Quasi Static Indentation on 3D Printed Honeycomb Based Truncated-Pyramid Square Structure
Dikshit Vishwesh
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Measurement Science and Methods
Dissipative Particle Dynamics Study of Ultraviolet Ink Agglomeration in 3D Inkjet Printing
Aphinyan Suphanat
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Applications and Industry
Encapsulation of Human Umbilical Vein Endothelial Cells within Gelma Fibers with Controlled Diameter for Vascular Tissue Engineering
Liew Wen Loon Andy
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
  Concurrent Session and Exhibition
Session Chair:
 Nanyang Assistant Professor
Kim Young-Jin
Venue1 (Auditorium)
Session Chair:
Assistant Professor Li Peifeng
Venue 2 (LT1)
Session Chair:
Assistant Professor
Zhou Yufeng
Venue 3 (LT2)
1235-1250
(15 mins)
Applications and Industry
Out of Plane Compressive Strength Of 3D Printed Vertical Pillar Based Core Structure
Dikshit Vishwesh
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
3D Printed Materials for High Torque Applications: Challenges and Potential
Goh Guo Dong
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Design
A Perspective on 3D Printed Membrane:
Direct/Indirect Fabrication Methods via
Direct Laser Writing
Lee Jian-Yuan
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
1300-1400
(60 mins)
LUNCH & NETWORKING SESSION
1400-1440
(40 mins)
Keynote Lecture 5: 
Potentials and Challenges in 3D Concrete Printing
Prof. Theo Salet
Professor, Eindhoven University of Technology, Netherlands
  Concurrent session and Exhibition
Session Chair:
Nanyang Assistant Professor
Tran Anh Tuan
Venue1 (Auditorium)
Session Chair:
Nanyang Assistant Professor
Kim Young-Jin
Venue 2 (LT1)
Session Chair:
Associate Professor Liu Yong
Venue 3 (LT2)
1440-1455
(15 mins)
Materials
Hydrothermal Synthesis of Hydroxyapatite Whiskers for Biomedical Applications
Dong Zhili
School Materials Science and Engineering, Nanyang Technological University, Singapore
Measurement Science and Methods
X-Ray CT Assessment of Porosity in AlSi10Mg Parts Fabricated by Selective Laser Melting
Cai Xingfang
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Microvalve Bioprinting of Cellular Droplets with High Resolution and Consistency
Ng Wei Long
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1455-1510
(15 mins)
Materials
Additive Manufacturing of Conductive 3D Structure
Cooperstein Ido
Casali Center for Applied Chemistry, Institute of Chemistry and Center for Nanoscience and Nanothechnology, The Hebrew University of Jerusalem, Jerusalem, Israel
Measurement Science and Methods
Review of the Fatigue Performance of Stainless Steel 316l Parts Manufactured by Selective Laser Melting
Zhang Meng
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Effects of Laser Processing on Nickel Oxide – Yttria Stabilized Zirconia
Tan Hong Yi Kenneth
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
  Concurrent session and Exhibition
Session Chair:
Nanyang Assistant Professor
Tran Anh Tuan
Venue1 (Auditorium)
Session Chair:
Nanyang Assistant Professor
Kim Young-Jin
Venue 2 (LT1)
Session Chair:
Associate Professor Liu Yong
Venue 3 (LT2)
1510-1525
(15 mins)
Design
Multidisciplinary Design Optimization for Additive Manufactured Customised Products
Yao Xiling
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Geometrical-Based Characterisation of Complex TI-6AL-4V Parts Fabricated by Selective Electron Beam Melting
Kok Yihong
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Curing Behaviour and Characteristics of Shape Memory Polymers by UV Based 3D Printing
Choong Yu Ying Clarrisa
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1525-1540
(15 mins)
Materials
Control of Residual Stress in Single-Track Electron Beam Melting of Ti6Al4V by Finite Element Modeling
Vastola Guglielmo
A*STAR Institute of High Performance Computing, Singapore
Measurement Science and Methods
Evaluation of 3D Scanner Using Elimination and Multi Criteria Decision Making (MCDM) Method
Ahmad Khairyanto Bin Ratmin
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Design
Functionally Graded Material by Selective Laser Melting
Choy Sing Ying
Singapore Centre for 3D Printing, Nanyang Technological University, Singaporera
1540-1555
(20 mins)
TEABREAK & NETWORKING SESSION  
1555-1610
(15 mins)
Applications and Industry
Additive Manufacturing of Unmanned Aerial Vehicles: Current Status, Recent Advances and Future Perspectives
Govdeli Yunus
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Further Analysis in Microstructure Evolution, Texture, Mechanical Properties and Fracture Behavior Of TI-6AL-4V Fabricated by Selective Laser Melting
Do Dang Khoa
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore    
Design
User-Centered Design for Additive Manufacturing as a Customization Strategy
Ko Hyunwoong
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1610-1625
(15 mins)
Materials
Selective Laser Melting of Spodumene: An
Exploratory Study
Gan Mingxuan
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Equipment and New Techniques
Current Challenges and Future Perspectives of 3D Concrete Printing
Tay Yiwei Daniel
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
Equipment and New Techniques
Sub-Micron Additive Manufacturing of Carbon Materials for Environmental Sensors by Femtosecond-Laser-Based Direct Laser Writing
Nguyen Trong Nghia
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1625-1640
(15 mins)
Equipment and New Techniques
Preliminary Investigation of 4D Printing Technology for Deployable UAV Development
Teoh Ee Mei Joanne
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Design
3D Printing of Microfluidic Sensor for Soft Robots: A Preliminary Study in Design and Fabrication
Goh Guo Liang
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Equipment and New Techniques
Fabrication of Complex Hydrogel Structure via
Free-Form Bioprinting: A Review
Tan Yong Sheng Edgar
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1640-1655
(15 mins)
Software and Data Processing Degradable vs. non-degradable bone fixation implants: A computational study
Altamimi Abdulsalam
Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK
Measurement Science and Methods
Effect of Inert Gas Flow Velocity and Unidirectional Scanning on the Formation of Spattered Powder During Selective Laser Melting
Ahmad Bin Anwar
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Applications and Industry
Bioprinting for Cardiovascular Tissue Engineering
Lee Jia Min
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1655-1715
(20 mins)
Lecture 2:
Laser Metal Deposition: Innovative 3D Printing Technology for High-Value Industrial Applications
Mr Frederic Le Moullec
BeAM Machines
1715-1755
(40 mins)
POSTER PRESENTATION
1755 CLOSING
 
Time Programme Speaker
0900-0940
(40 mins)
Keynote Lecture 6: 
Emerging Trends in Reverse Engineering
Prof. Bopaya Bidanda
Professor, University of Pittsburgh, USA
0940-1020
(40 mins)
Keynote Lecture 7: 
Medicine 4.0: The Role of Additive Manufacturing
Prof. Paulo Bartolo
Professor, University of Manchester, UK
1020-1040
(20 mins)
TEA BREAK & NETWORKING SESSION
  Concurrent Session and Exhibition
Session Chair:
Associate Professor
Sunil Chandrakant Joshi
Venue1 (Auditorium)
Session Chair:
Associate Professor Zhang Yilei
Venue 2 (LT1)
Session Chair:
Associate Professor
Sridhar Idapalapati
Venue 3 (LT2)
1040-1100
(20 mins)
Equipment and New Techniques
High Power Multi-Laser Selective Laser Melting Technology
Invited Speaker:
Stefan Ritt
SLM Solutions  
Materials
Laser additive manufacturing of light-weight Al-based aerospace components: An integration of structure, material and process
Invited Speaker:
Gu Dong Dong
Nanjing University of Aeronautics and Astronautics (NUAA)
Measurement Sciences and Methods 
Studies on Effect of Area-Filling Pattern on Residual Stress Evolution in Weld-Deposition Based Additive Manufacturing
M Naveenkumar
Indian Institute of Technology Hyderabad
1100-1115
(15 mins)
Materials
Dynamic Mechanical Behaviours and Thermal Decomposition of Laser Sintered Polyurethane Incorporated with MWCNTs
Yuan Shangqin
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Fabrication of Titanium Lattice Structures by Selective Laser Melting for Osteochondral Tissue Regeneration
Wang Shuai
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Equipment and New Techniques
Experimental Investigation on Fracture Resistance Behavior of Additive Manufactured Multi Material Structure with Corrugated Interface
Vijayanand Rajendra Boopathy
CEG Anna University, Chennai, India
1115-1130
(15 mins)
Materials
Identifying New Process Parameters for Preparing Poly-caprolactone Powder with a Solution Spraying Technique
Phattanaphibul Thittikorn
Department of Industrial Engineering, Kasetsart University, Thailand
Materials
Selective Laser Melting of Nickel Titanium Shape Memory Alloy
Khoo Zhong Xun
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Equipment and New Techniques
Particle Accumulation in Microchannel and its Reduction by Surface Acoustic Wave (SAW)
Sriphutkiat Yannapol
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore    
  Concurrent session and Exhibition
Session Chair:
Associate Professor
Sunil Chandrakant Joshi
Venue1 (Auditorium)
Session Chair:
Associate Professor Zhang Yilei Venue 2 (LT1)
Session Chair:
Associate Professor
Sridhar Idapalapati
Venue 3 (LT2)
1130-1145
(15 mins)
Applications and Industry
Inkjet Printed Stretchable Electrodes for Tunable Focus Lens
Shrestha Milan
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
Materials
Selective Laser Melting of Copper Based Alloy on Steel: A Preliminary Study
Tey Cher Fu
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Equipment and New Techniques
Robotic 3D Printing for Building and Construction
Lim Jian Hui
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
1145-1200
(15mins)
Equipment and New Techniques
Additive Manufacturing of Metal Nanowires for Transparent Electrodes by Femtosecond-Laser-Based Direct Laser Writing
Le Dinh Truong Son
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
Measurement Science and Methods
Benchmarking of Material Jetting Process: Process Capability Study
Yap Yee Ling
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
Characterization of Thermoplastic Polyurethane Powders to Determine Laser Sintering Processability
Verbelen Leander
Department of Chemical Engineering, KU Leuven; Department of Mechanical Engineering, KU Leuven, Belgium
1200-1215
(15 mins)
Materials
The Effect of Laser Power and Scanning Speed on The Density of Selective Laser Melting Fabricated AL-CNT Composites
Du Zhenglin
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
Design
Influence of the Geometric Factor for the Width of the Contour Scan in Selective Laser Melting
Ahn Il Hyuk
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore
Materials
3D Printed Electronic Tracks for Bio-Integrated Free-Form Devices
Shweta Agarwala
Singapore Centre for 3D Printing, Nanyang Technological University, Singapore  
1215-1255
(40 mins)
Keynote Lecture 8: 
Material Characterisation and Mechanical Properties of Metallic AM Systems
Prof. John Lewandowski
Professor,
Case Western Reserve University, USA
1255-1355
(60 mins)
LUNCH & NETWORKING SESSION
1355-1455
(60mins)  
Lab Tour at SC3DP Future of Manufacturing Lab 1 (FoM1 Lab)

Day 3: 19th May 2016 - CONFERENCE BANQUET
1630-1700
(30mins)
Meet up point at NEC carpark to board the coach to Marina Bay Sands
1700-1745
(45mins)
Depart to Conference Banquet Venue at Marina Bay Sands
1745-1830
(45mins)
Arrival of Guest and Reception at Marina Bay Sands
1830-1900
(30mins)
Guests to be seated down
1900 -2100 CONFERENCE BANQUET
Venue: Marina Bay Sands, Singapore
Function Room Name: Roselle Junior Ballroom, Level 4

 

 

 

 










 
sponsors
 
Copyright © 2016 Pro-AM 2016. All rights reserved.